2003
Retail Price List - Rolls Effective
May 1, 2003
Roller
Diameter
Size Range
Quarter
Roll
5 Yards (4.5m)
Half
Roll
10 Yards (9m)
Full
Roll
20 Yards (18m)
Order
#
Price
Order
#
Price
Order
#
Price
3/4”
to 1”
(20 to 25mm)
NMQ-9
$96.00
($19.20 Yd)
NMH-9
$168.00
($16.80 Yd)
NMF-9
$290.00
($14.55 Yd)
1
to 1 3/8”
(25 to 35mm)
NMQ-8
$96.00
($19.20 Yd)
NMH-8
$168.00
($16.80 Yd)
NMF-8
$290.00
($14.55 Yd)
1
3/8” to 1 3/4”
(35 to 45mm)
NMQ-7
$100.00
($20.00 Yd)
NMH-7
$173.00
($17.30 Yd)
NMF-7
$302.00
($15.10 Yd)
1
5/8” to 2”
(40 to 50mm)
NMQ-6
$107.00
($21.40 Yd)
NMH-6
$186.00
($18.60 Yd)
NMF-6
$323.00
($16.15 Yd)
1
3/4” to 2 3/8”
(45 to 60mm)
NMQ-5
$115.00
($23.00 Yd)
NMH-5
$201.00
($20.10 Yd)
NMH-5
$349.00
($17.45 Yd)
2
1/8” to 2 3/4”
(55 to 70mm)
NMQ-4
$126.00
($25.20 Yd)
NMH-4
$217.00
($21.70 Yd)
NMH-4
$379.00
($18.95 Yd)
2
1/2” to 3 1/8”
(65 to 80mm)
Not
Available
NMH-3
$251.00
($25.10 Yd)
NMH-3
$437.00
($21.85 Yd)
2
3/4” to 3 1/2”
(70 to 90mm)
NMH-2
$284.00
($28.40 Yd)
NMH-2
$495.00
($24.75 Yd)
NOTE: “Cost Per Yard” prices
are for cost comparison only. Material is sold only in roll lengths as
indicated.
1) Measure the diameter of the roller and select the
appropriate size from the chart above. If the roller size falls within
the range of two different sizes, select the larger size for easier
fitting and complete shrinkage.
2) This product is most effective when used as the sole covering
on the roller. It may, however, be used over an fabric undercover. When
selecting a size, be sure to take the thickness of the undercover, if
any, into consideration.
3) New Mol shrinks for a tight fit around the diameter of the
roller but must be sewn, wrapped, or tied on the ends to prevent
side-to-side movement.
4) Full rolls may consist of 1 to 3 variable lengths of material
totaling 20 yards, plus approximately 6% to compensate for any waste.
Half rolls may consist of 1 or 2 lengths of material plus approximately
5% to compensate for any waste. Quarter rolls always consist of one
continuous 5 yard (4.5m) length.
Pamarco
Global Graphics is proud to announce
a NEW “Form Roller Only” kit for the
Presstek
34DI /Kodak 5634DIThis new kit will contain a complete set of Ink
Form Rollers
For all
four ink units
and includes all the necessary hardware and adjusting collars for every
version of press. This takes the guess work out of which roller to
order!
Use your computer to design the
work 
